How To Install Window Blinds In Philadelphia

Numerous Philadelphia residents choose window blinds when they want more privacy and management over daylight in their homes. They’re a practical and budget-friendly window covering. They also take just a few steps to install for experienced DIYers. But, nothing is better than choosing a qualified window treatment installer. Here are the fundamental steps of installing window blinds and when you ought to call the experts to handle it for you.

Get Measurements And Mark Everything Exactly

Before you start, determine if you should get outside-mount or inside-mount blinds. This vital bit of info will let you know where to measure. Take measurements of the width, depth, and height on the inside of your frame for inside-mount options. When hanging outside-mount blinds, measure the height and width of your window, which includes the trim, and then extend your measurements by three inches to make sure you get adequate coverage. Measure exactly–avoid rounding up or down. Improperly measured blinds won’t function correctly.

Choose Your Blinds

After you get your measurements, you are ready to choose your blinds. You might already know what type of blinds you want. Get blinds that are as even with your measurements as possible. Off-the-shelf blinds often won’t fit precisely, either extending out too much or not getting to the edge of the window completely. Ensure you have equipment that allow you to install the blinds at the appropriate depth, also. You’ll need to order custom-made blinds for a superior fit.

Install Your Window Blinds

Your blinds may have instructions. Adhere to them to affix your exact product. If you wish to have a sample of how challenging it is to install window blinds in Philadelphia, here is a summary of general steps to give you a better understanding.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the inside of the window approximately an inch from the outer edge. Make sure this placement won’t hinder the blind’s operation. Use a pencil to indicate the bracket holes.
2. Drill pilot holes in the proper spots.
3. Align the bracket where you drilled and drill in the screws.
4. Redo the opening three steps for the next bracket.
5. Snap the end caps onto the top rail of your blinds. Slide the headrail into the brackets.

Connect the tilt wand and try it out. Additionally, evaluate the pull cord.

Outside Mount Blinds

1. Figure out if you’re mounting on the wall above the window or the window’s trim. Hold up the headrail and make sure the blind reaches the lower edges of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes on your marks.
5. Line up the bracket openings with the pilot holes and fasten with screws.
6. Slide the headrail into the brackets.

Connect the tilt wand and try out everything to ensure it works.

Choose The Most Effortless Way To Install Blinds 

Just a reminder, you don’t have to put up blinds on your own. The easiest way to install window blinds in Philadelphia is to hire an expert window treatment installer. They will guide you at every step. They’ll help you pick blinds that match your needs and preferences, make accurate measurements for a custom product, and attach them for you. They guide customers each day, so they’ll do it efficiently and accurately. They will remedy any challenges without wasting hours looking for help online. A window treatment expert will also offer better-quality blinds than online or box stores.

Save Yourself The Trouble And Ask Sunburst Shutters To Install Your Window Blinds In Philadelphia

Getting new window blinds in Philadelphia couldn’t be simpler when you turn to Sunburst Shutters Philadelphia. We’ll help you find made-to-order blinds that will match your windows precisely, and our professional installation crew will affix them for you. All you need to do is dial 215-874-4897 or fill out the form on this page to arrange a no-cost in-home consultation.